Issue with upgrading 3750 IOS feature-set via LMS/RME

[Guest]

Hello.

Has anyone experienced any issues with upgrading the feature-set of 3750s from ipbase to ipservices (same version)?

There is the '/allow-feature-upgrade' option via cli but not on RME. Is this even supported on LMS?

Thx.

[Guest]

Yes, RME can do this provided you have not checked the "Include same image feature subset as running image." box under RME > Admin > Software Mgmt > View/Edit Preferences.

[Guest]

Thanks for the reply Joe.

This option is not checked.

This is the error message from the telnet log;

'Error: The image in the archive which would be used to upgrade system number 1 does not support the same feature set.'

Also the log shows;

'archive download-sw /overwrite tftp://...'

but not '/allow-feature-upgrade'.

This is upgrade from c3750-ipbasek9-mz.122-35.SE1 to c3750-ipservicesk9-mz.122-35.SE1

[Guest]

How is this switch configured (i.e. is it in a stack configuration)?

[Guest]

Default single switch (c3750-48PS), straight out of box. Just got an ip-address, snmp, etc for basic management.

We're testing before a major deployment. I was gonna log a call but thought I'd check here first.