Cisco 7912 IP Phones do not boot up

This is for more general topics about networking and vendors.
Post Reply
Guest

Cisco 7912 IP Phones do not boot up

Post by Guest » Fri Dec 03, 2010 12:10 pm


I have some 7912 IP phones that do not end its boot process. They remain with both lights on without doing anything else.

Guest

Re:Cisco 7912 IP Phones do not boot up

Post by Guest » Fri Dec 03, 2010 12:24 pm


You might be running into this...<a href="http://www.cisco.com/cgi-bin/Support/Bu ... sa72417</a> Bug Details: 7912 dies when configuring Graphics via TFTP on CCM 4.1  Don't forget to rate the post if it helps you out

Guest

Re:Cisco 7912 IP Phones do not boot up

Post by Guest » Fri Dec 03, 2010 1:32 pm


You are 100% right! Additional details provided by the Cisco engineer who spoke with me yesterday is that it is very important to check the load of the IP Phone. CP7912060000SCCP050124A is affected.

Post Reply