PPPoE multiple profiles for VPDN

Post a reply


In an effort to prevent automatic submissions, we require that you complete the following challenge.
Smilies
:D :) ;) :( :o :shock: :? 8-) :lol: :x :P :oops: :cry: :evil: :twisted: :roll: :!: :?: :idea: :arrow: :| :mrgreen: :geek: :ugeek:

BBCode is ON
[img] is ON
[flash] is OFF
[url] is ON
Smilies are ON

Topic review
   

Expand view Topic review: PPPoE multiple profiles for VPDN

Re:PPPoE multiple profiles for VPDN

by Guest » Wed Nov 24, 2010 10:28 am


Hi David,Nice document, enjoy :) And please keep us updated.By the way, since IOS 12.4(2)T:cisco-avpair = "ip:sub-policy-In=in-policy-name"cisco-avpair = "ip:sub-policy-Out=out-policy-name"Are replaced with the following new attributes:cisco-avpair = "ip:sub-qos-policy-in=in-policy-name"cisco-avpair = "ip:sub-qos-policy-out=out-policy-name"But anyway as per Cisco, the replaced attributes will be supported for several more software releases, but profiles should be updated with the new attributes as soon as it is feasible to do so.http://www.cisco.com/en/US/docs/ios/12_ ... R,Mohammed Mahmoud.

Re:PPPoE multiple profiles for VPDN

by Guest » Wed Nov 24, 2010 9:26 am


Ok, so single bba group with a single virtual template on a single interface.Then a policy map for each user grouping.I found this document which looks like it has most of the info I need.http://www-europe.cisco.com/univercd/cc ... ad.htmOnce I have it sussed I'll post the final config snippet

Re:PPPoE multiple profiles for VPDN

by Guest » Wed Nov 24, 2010 8:41 am


Hi,Fine, this doesn't mean that you'll apply a different virtual-template per each class, what you are going to do is to apply a Cisco AVP per customer profile to be used to clone the virtual-access.cisco-avpair = "ip:sub-qos-policy-in=in-policy-name"cisco-avpair = "ip:sub-qos-policy-out=out-policy-name"BR,Mohammed Mahmoud.

Re:PPPoE multiple profiles for VPDN

by Guest » Wed Nov 24, 2010 7:54 am


I understand that it is a RADIUS AVP, the question being how to apply it.D

Re:PPPoE multiple profiles for VPDN

by Guest » Wed Nov 24, 2010 7:14 am


Hi,AFAIK, to apply a different virtual-template you need to apply a different bba-group, and to apply a different bba-group you need to use VLANs and subinterfaces - i think that you can work around and use this model.Another prospective to think with, is that you can search if what you require to do can be sent by the RADIUS as a Cisco RADIUS AV Pair according to the customer profile.BR,Mohammed Mahmoud.

Top