7600 CPUs

MIBS, SMMPv1, SMMPv2, SMMPv3 and management
Guest

7600 CPUs

Post by Guest » Sun Jan 09, 2011 2:10 pm


If I snmpwalk a 7600 with dual sups with cpmCPUTotal5minRev I get:CISCO-PROCESS-MIB::cpmCPUTotal5minRev.1 = Gauge32: 1 percentCISCO-PROCESS-MIB::cpmCPUTotal5minRev.2 = Gauge32: 2 percentCISCO-PROCESS-MIB::cpmCPUTotal5minRev.3 = Gauge32: 0 percent I'm assuming I have another cpu on one of the boards. Are they numbered in the order they are in the chassis? If so, it seems odd the redundant sup would have high cpu.

Guest

Re:7600 CPUs

Post by Guest » Sun Jan 09, 2011 3:21 pm


You can find what each CPU is by querying the Cisco-Entity-MIB, specifically the entPhysicalName and entPhysicalDescr OIDs. From what I've seen, modules such as the FlexWAN cards have multiple CPUs on them too.

Guest

Re:7600 CPUs

Post by Guest » Sun Jan 09, 2011 3:43 pm


Poll the cpmCPUTotalPhysicalIndex for these indexes, then poll entPhysicalName and entPhysicalDescr from the ENTITY-MIB to get the details for each CPU.

Guest

Re:7600 CPUs

Post by Guest » Sun Jan 09, 2011 4:50 pm


Thanks guys.

Post Reply