Changing IOS on 3750
Re:Changing IOS on 3750
I mistakenly rebooted the 3750 after I deleted the IOS........Now I am having trouble reloading an IOS. I would like to load the following: c3750-pservicesk9-mz.122-35.SE5.binI am using HyperACCESS to connect to the switch with a roolover cable.My last attempt gave me the following:switch: copy xmodem: flash:c3750-ipservicesk9-mz.122-35.SE5.binBegin the Xmodem or Xmodem-1K transfer now...CCCCCCCCCCBB0BB0xmodem:: I/O errorPlease start form the begining. This is my current switch prompt:switch:
Re:Changing IOS on 3750
HiCheck your serial connection settings, they should be Bits per second: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow control: NoneEnter the following commands :-flash_initload_helperCopy the IOS again via xmodem boot flash:c3750-pservicesk9-mz.122-35.SE5.bin
-
- Site Admin
- Posts: 19
- Joined: Wed Apr 27, 2011 8:06 pm
Re: Changing IOS on 3750
Now that was easy..