Cisco 6509 Switch module reset and PORT LED went Off

VTP, Portfast, Spanning Tree and all the other switch related stuff.
jimnesh
Hello I'm new here
Posts: 3
Joined: Tue Oct 16, 2012 10:30 pm
Location: Bangalore

Cisco 6509 Switch module reset and PORT LED went Off

Post by jimnesh » Tue Oct 16, 2012 10:44 pm

i have cisco 6509 switch with redundant sup engine WS-X6K-SUP1A-2GE the details of the modules are mentioned below.
1 1 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes ok
15 1 1 Multilayer Switch Feature WS-F6K-MSFC2 no ok
2 2 2 1000BaseX Supervisor WS-X6K-SUP1A-2GE yes standby
16 2 1 Multilayer Switch Feature WS-F6K-MSFC2 no standby
3 3 48 10/100BaseTX Ethernet WS-X6348-RJ-45 no ok

while working all of a sudden all the LED's in the third module went off after hard rebooting the all the link came up. the details of the logs are mentioned below.
2012 Oct 12 03:07:10 IST +05:30 %SYS-5-MOD_NOSCPPINGRESPONSE:Module 3 not responding... resetting module
2012 Oct 12 03:07:10 IST +05:30 %SYS-5-MOD_RESET:Module 3 reset from Software
2012 Oct 12 03:07:40 IST +05:30 %PAGP-5-PORTFROMSTP:Port 3/6 left bridge port 3/6
please help me to troubleshoot this the problem with sup engine or the third module?

jimnesh
Hello I'm new here
Posts: 3
Joined: Tue Oct 16, 2012 10:30 pm
Location: Bangalore

Re: Cisco 6509 Switch module reset and PORT LED went Off

Post by jimnesh » Thu Oct 18, 2012 9:51 pm

any help regarding the above post

jimnesh
Hello I'm new here
Posts: 3
Joined: Tue Oct 16, 2012 10:30 pm
Location: Bangalore

Re: Cisco 6509 Switch module reset and PORT LED went Off

Post by jimnesh » Wed Oct 31, 2012 8:41 pm

Dear Members any help in this regard its very urgent

Post Reply