One lacp question

VTP, Portfast, Spanning Tree and all the other switch related stuff.
nicolas_cyprus
Cisco FastHub400
Posts: 6
Joined: Sun Feb 16, 2014 3:53 pm
Location: GB

Re: One lacp question

Post by nicolas_cyprus » Sun Feb 16, 2014 3:56 pm

Hello,

If I understood correctly, you have one 10Gb/s port on the Cisco and Huawei switch and you want to make an etherchannel. Why dont you put 2 connections to it, the primary being the 10Gb/s connection and the 1gb/s backup link. Backup link will be STP blocked and enabled when the primary link fails.

This way you wont 'waste' the 10G port.