MDS 9124 SAN-OS Recovery

Support for NAS servers.
Guest

MDS 9124 SAN-OS Recovery

Post by Guest » Thu Sep 28, 2006 1:56 pm


I am brand new to the fabric switch world and until now have only had experience with ethernet switches. I take care of the network infrastructure where I work and have been tasked with documenting a backup/recovery procedure for our fabric switches the same way we have it for our ethernet switches.I have noticed that the SAN-OS images are much bigger than IOS so it made sense why SAN-OS wouldn't allow xmodem transfers. With that though, comes the problem of how to recover SAN-OS. I searched around for documentation on this and haven't been able to find anything. I was just wondering if anybody can point me to a doc on how to restore SAN-OS from rommon or whatever it is called on these switches. I would also like to know what the escape sequence to get into rommon is if it exists on these switches.Thanks

Guest

Re:MDS 9124 SAN-OS Recovery

Post by Guest » Thu Sep 28, 2006 3:06 pm


Hello Joe,these two links should help you:http://www.cisco.com/en/US/docs/storage ... c3.shtmlIf you have any additional questions, feel free to ask.Regards,Roman

Guest

Re:MDS 9124 SAN-OS Recovery

Post by Guest » Thu Sep 28, 2006 4:30 pm


Exactly what I was looking for. Thank you much.

Post Reply