No Pim Neighbor with MVPNs

Static, RIP, EIGRP, OSPF, BGP, IBGP, IS-IS and any other routing.
Guest

Re:No Pim Neighbor with MVPNs

Post by Guest » Thu Feb 24, 2005 4:40 pm


HiThe RR are backward capatible. http://www.cisco.com/en/US/prod/collate ... ardsshivlu jain

Guest

Re:No Pim Neighbor with MVPNs

Post by Guest » Thu Feb 24, 2005 4:57 pm


Yeah I have already read this, but was just wondering if you had it working as well?

Guest

Re:No Pim Neighbor with MVPNs

Post by Guest » Thu Feb 24, 2005 5:09 pm


Hi,*Sep 23 05:17:59.111: vpn: sourced prefix 2:20:1:203.194.30.63/32 not in any VRF, not allocating local label It's a locally generated update. If 203.194.30.63 is the address of PE1 then this is the update generated by PE1.Do you have send-community both configured under the MDT AF ?ThanksLaurent.

Guest

Re:No Pim Neighbor with MVPNs

Post by Guest » Thu Feb 24, 2005 5:16 pm


Hi Laurent, welcome to the party :o)well from the PE point of view b/c its non SAFI the connection is via VPNv4 but both is stipulated. I think i read in the whitepaper that cisco released they say if you have a hybrid environment then you must have both stipulated on the RR, so in answer to your question yes we do have it. PE1 is non SAFI shows no PIM neighborPE2 is SAFI and show one PIM neighbor(which happens to be PE1)Cheers

Guest

Re:No Pim Neighbor with MVPNs

Post by Guest » Thu Feb 24, 2005 5:56 pm


output from sh ip pim vrf "" neighbor commandPE2sh ip pim vrf mpls neighbor PIM Neighbor TableMode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,      P - Proxy Capable, S - State Refresh CapableNeighbor          Interface                Uptime/Expires    Ver   DRAddress                                                            Prio/Mode203.194.30.63     Tunnel0                  2d22h/00:01:28    v2    1 / DR SPE1sh ip pim vrf mpls neighbor PIM Neighbor TableMode: B - Bidir Capable, DR - Designated Router, N - Default DR Priority,      S - State Refresh CapableNeighbor          Interface                Uptime/Expires    Ver   DRAddress                                 

Post Reply