Enable RTCP on CUCM 8.5

Cisco CallManager, Cisco CallManager Express and IP Video
cscnrsh
Hello I'm new here
Posts: 3
Joined: Fri Jun 10, 2011 4:17 am

Enable RTCP on CUCM 8.5

Post by cscnrsh » Mon Jun 13, 2011 6:06 am

hi,

How to enable RTCP support on CUCM?
While I have the Device Protocol as SIP "Phone Configuration" page shows the dropdown to enable/disable.
how about in case of using SCCP as my SIP Device? where must I be configuring the same?

regards,
Naresh

cscnrsh
Hello I'm new here
Posts: 3
Joined: Fri Jun 10, 2011 4:17 am

Re: Enable RTCP on CUCM 8.5

Post by cscnrsh » Wed Jun 22, 2011 6:34 am

I learnt that RTCP is a end product specific configuration, not all the cisco phones support RTCP. Cisco7970, 7962 has this support and this can be enabled under "Phone Configuration -> Product Specific Configuration Layout”

thank you,

Post Reply